Is any concrete coating really “lifetime”?
No. Every coating is a wear surface — sun, tires, pool chemicals and foot traffic consume it slowly, and Phoenix sun speeds that up. Some companies advertise “lifetime warranties,” but those typically cover defects in their material, not normal wear, and they don’t stop the topcoat from wearing through. What actually makes a coating last is the unglamorous part: correct prep, a free inspection every year, and resealing on schedule. That’s the deal we offer instead of a lifetime slogan.
How often does a coating need to be resealed?
It depends on the system. Acrylic sealers and cool deck finishes: roughly every 1 to 3 years. Penetrating sealers: about 3 to 7 years. Epoxy and polyurethane systems: about 5 to 10 years before a topcoat refresh. High traffic, direct sun and pool chemicals all shorten those windows — which is exactly why the yearly inspection is free: we tell you where yours stands before it’s overdue.
Can you really renew a coating instead of replacing it?
In most cases, yes. If the concrete slab is sound and the existing coating is mostly bonded, we can grind, repair the failed areas, and apply a fresh system over it — or strip just the coating and recoat the original slab. Replacement is only necessary when the concrete itself has heaved, settled badly or crumbled. At your free estimate we test the bond and show you what we find, so the recommendation is based on your floor, not our sales quota.
What does the free yearly inspection include?
A full walk of the coated surface: topcoat wear and UV damage, peeling or blistering, cracks and joint condition, drainage and standing-water spots after monsoon season, plus a written condition report with an honest remaining-life estimate and reseal recommendation. It takes about 15–30 minutes, it’s free for any coating we installed or renewed, and we’ll happily inspect a coating another company installed — also free.
How much does renewal cost compared to replacement?
Renewal typically costs a fraction of tear-out and replacement, because you skip demolition, haul-off, new concrete and the weeks of curing before new concrete can even be coated. Every surface is different, so we don’t quote square-foot prices sight unseen — your free estimate gives you an exact, written number for your surface, plus the replacement comparison so you can see both.
How long does a renewal take, and when can I use the surface?
Most residential renewals take 1 to 3 days depending on repairs and system. Light foot traffic is usually fine within about 24 hours of the final coat; vehicles and pool use wait a bit longer depending on the system. We’ll give you exact return-to-service times in writing before we start.
Who actually does the work?
The owner. Phoenix Concrete Coatings is owner-operated: the owner visits for the estimate, runs the grinder and the roller on install day, does the final walk-through with you, and personally comes back for your yearly inspections. No subcontractors, no rotating crews.
